Description

EXTRA HEAVY DUTY MEMBRANE SOLVENT BASED POLYURETHANE 15 LITRE DRUM NEW Buy 10 drums get free delivery to nsw Victoria Brisbane JUSTWATERPROOFING THE ORIGINAL AND LARGEST SELLER OF WATERPROOFING PRODUCTS PERFECT FOR PLANT BOXES, LANDSCAPED AREAS, RETAINING WALLS, BALCONIES, TANKS, PITS, BOX GUTTERS FLAT ROOFS
 ENQUIRIES 1 8 0 0 1 5 2 1 7 2 
 DELIVERY 
 FLAT RATE $19 DELIVERY FOR NSW VICTORIA BRISBANE ADELAIDE & PERTH NO PO BOX
 IF YOU LIVE OUTSIDE THESE AREAS EMAIL US FOR A FREE QUOTE ON DELIVERY VISIT WWWJUSTWATERPROOFINGCOMAU (WE ACCEPT MOST CREDIT CARDS) TRACKING NUMBER WILL BE EMAILED AS SOON AS PAYMENT RECIEVED Description Duram 195 is a single pack, liquid applied, moisture curing, self leveling, waterproofing membrane which cures to form a seamless, tough, durable, elastomeric (class 3 ) waterproofing membrane. Duram 195 incorporates UV stabilisers, UV absorbers and anti-oxidants to enable the product to provide greater UV protection and stability than conventional aromatic polyurethane membranes. Duram 195 bonds well to most suitably primed building substrates and is suitable for above and below ground applications. 
Colour: Black / Charcoal grey but will not bleed or stain tiles or grout as the product is tar and bitumen free.  Uses Duram 195 is designed to waterproof most applications within the building and construction industry including: 

Exposed Areas: Roofs, decks, terraces, balconies, podiums and gutters. 

Tiled or Covered Areas: Shower recess & wet areas (floors and upturns), decks, balconies, terraces, podiums, retaining walls, planters & landscaped areas, structural slabs, tanks, pits, bunding areas and water features.  Suitable Surfaces Duram 195 is suitable for most building substrates including: Concrete • Cement • Cement Render • FC and CFC Sheeting • Render • Brick • Block work • Plaster Board • Masonry • Bitumen (when primed with Duram Primeseal) • Metal • Timber, Particle Board and Plywood ( when primed with Duram Primeseal).

Surfaces must be made good and should be sound, stable, dry, clean and free of dirt, dust and contaminants and suitably primed.  Benefits and Advantages Duram 195 represents the highest standards in polyurethane waterproofing technology and provides the following benefits and advantages: • Single pack - no mixing. • Fast curing within 24 hours). • Permanently flexible ( tests show flexibility > 500% - Class 3 [highest class of extensibility]). • Will not stain tiles or grout - as Duram 195 is tar and bitumen free. • Self levelling and seamless membrane (no joints or laps). • Suitable for immersion in water. • Can be directly tiled (broadcasting of sand in to final wet coat is recommended). • Good chemical resistance. • High strength and puncture resistant. • Easily repaired and or maintained. • Odourless (subjective) when cured. • Formulated to provide long term protection. • Easy to apply. • Has good hydrostatic resistance. • Usually black to charcoal grey in the can. • 25 year history of Australian use. Precautions in Use Risk is considered low when properly used but precautions on can, label and / or data sheets should be observed. Use in well ventilated areas. Uncured product is flammable, so keep all sources of ignition away from product and its vapours. Application Apply Duram 195 by brush, roller, broom and squeegee in a minimum of two coats, usually a day apart so that the minimum dry film thickness in 1.2mm. Where no primer is used, an additional coat of Duram 195 is recommended. The minimum wet coat thickness per coat is 0.5mm. 
 Coverage The stated average coverage rate may vary depending upon type, condition, porosity, texture of the surface and application technique. Duram 195: Generally, 1.5 to 1.6 litres per sq.m. for two coats combined, i.e. 0.75 to 0.80 litres per sq.m. per coat. Average 15 Lt pail usage approximat